BMW – VTC Performance

Volvo FH 500 12.8 EURO 6

admin_vtc — Wed, 24 Jan 2024 05:54:08 +0000

The FH500 euro 6 12.8L engine, producing 500HP and 2500 Nm with an automatic I-Shift dual clutch gearbox can benefit hugely from our custom ECU software calibration. To achieve the maximum efficiency, we must have optimum performance for the job at hand.

As always, truck tuning needs to be tailored to the customers needs. We offer power gains from +30 up to +100 HP and up to +350 Nm depending on what’s required.

Improved torque delivery with the intelligent gearbox enables optimum gear changing and efficiency. Fuel savings of 8-10% are very realistic to expect.

We provide the software files through our dealer network worldwide – www.files.vtcperformance.com

Where SCR systems, Adblue, DPF and EGR are causing errors, we can provide the software to solve these issues, prevent limp mode and poor fuel economy. It’s important to note, it is illegal to delete any emission components from the vehicle in most countries, so check your local laws before deciding to interfere with these systems.

Mercedes C63s AMG W205

admin_vtc — Wed, 24 Jan 2024 05:48:51 +0000

Our Stage 1 ECU Remap for the C63 & C63s 4.0T engine gives a significant boost in performance. Engine power increases to around 590 bhp and torque to around 850Nm which transforms the way the car drives. We have tuned many of these engines and spent countless hours developing and testing the software to produce reliable performance every time.

Scania S series Euro 6

admin_vtc — Wed, 24 Jan 2024 05:48:06 +0000

The typical Stage 1 tuning we offer on these goes to 670 HP and 3300 Nm. Of course in truck tuning, it is always individual in each case to suit the needs of the owner and keep fuel efficiency in mind. Custom tuning and correct power level is carefully calibrated, and we have spent many hours on our MAHA truck dyno perfecting our software files for this engine. Fuel efficiency tuning offers up to 10% reduced consumption.

Our software files for the Euro6 V8 range are available via our dealer network –

Equipped with EMD1 and S8 engine control units (ecu), we have many options available including SCR / Adblue, DPF and EGR solutions.

Any deletion software is subject to local legislation and is the responsibility of the owner.

To become and dealer and purchase software for Scania S series euro 6 , register on our dealer portal –

BMW M5 F90

admin_vtc — Wed, 24 Jan 2024 05:44:25 +0000

The F90 version of the M5 is the first ever to have 4WD, with its Xdrive system helping to put down the whopping 600 bhp and 750 Nm being produced from its 4.4 twin turbo engine. But it’s no secret the F90 series has an abundance of more power just waiting to be unlocked and with our software calibration options we can do just that.